Last updated on May 14, 2015

Installing and Registering SmartHub ASE

Introduction

The following guide will outline the overall deployment process (installation and registration) of the SmartHub ASE. This guide contains four sections:

Downloading and Installing SmartHub ASE

Step 1

You will need to first acquire the SmartHub ASE installation wizard from Appspace Cloud (https://cloud.appspace.com). Once you have successfully logged in, access the Downloads page from the drop-down menu in the upper right corner (System > Downloads). Scroll down and find the latest Appspace SmartHub ASE installer and click ‘Download’.


When prompted, check the box to agree to the Terms of Service and EULA. Click the Download button to save the installation package to your local machine.

Step 2

Locate the AppspaceSmartbubASESetup installer and double-click to launch the application to begin the installation.

../../../../_images/02a59.png

Step 3

At the Welcome to Appspace Smarthub ASE Setup Wizard screen, click Next to begin the installation process.

../../../../_images/03a50.png

Step 4

Check the box to accept the License Agreement and click Next to continue.

../../../../_images/04a42.png

Step 5

When asked to choose the setup type, select Typical.

../../../../_images/05a32.png

Step 6

Click Install to begin the installation.

../../../../_images/06a24.png

Step 7

Once installation has completed, click Finish to exit the installer.

../../../../_images/07a16.png

Step 8

Locate the Appspace SmartHub ASE icon on your desktop (or alternatively from your Start Menu, within Programs). Double-click on the Appspace SmartHub ASE to launch the SmartHub Configuration Wizard.

../../../../_images/08a16.png

Step 9

The SmartHub Configuration Wizard will display a list of installation tasks. Click the Install button to begin installation.

Step 10

During the installation, the wizard will display the progress of each step with a status bar and completion icons. Completed tasks are marked GREEN, tasks in progress are marked BLUE, and pending tasks are in GREY. Once the setup has completed, all tasks should have full progress bars and GREEN icons. Click Finish to proceed.

Note

At this point the SmartHub Setup Wizard will be automatically launched/started. Follow the instructions in the next section to begin the SmartHub registration process.

Registering SmartHub ASE with Appspace

Upon the successful installation of SmartHub, a web browser will likely have auto-launched and directed you to the SmartHub Setup Wizard. If this did not happen or you need to manually access the SmartHub Setup Wiard, you may access it at “localhost/smarthub/setupwizard.aspx” via a web browser.

Step 1

From the SmartHub Setup Wizard welcome page, click Next to begin the process.

Step 2

At the Login configuration page, you will be asked to provide an IP Address along with a Username/Password.

If you are registering your SmartHub to a local, on-premise Appspace server instance - enter the server’s IP adress along with credentials used to access your Appspace server and click Next to continue.


If you are registering your SmartHub to the Appspace Cloud - you will need to obtain a registration link from the Downloads page of your Appspace Cloud account. You will find this link at the top of the Downloads page. Use that link along with your Appspace Cloud credentials for the setup wizard and click Next to continue.

Step 3

Provide a name for management and identification purposes within Appspace. Click Next to continue.

Step 4

When completed, the wizard will display a confirmation message with the Registration Status: Activated. You may also see a summary of the number of SmartHub licenses remaining in your account. Click the Finished button to continue.

Step 5

The system will default to the Configuration tab where you can change the configuration settings if needed (be sure to click the Update button to apply any changes). If the default settings are to be used, simply click Cancel.


The following table describes the settings that can be used to control the bandwidth used by SmartHub ASE to download content from Appspace.

Properties Details
Update Interval (ms) SmartHub ASE makes a periodic check with Appspace to check for any updates. The frequency is determined by this property expressed in milliseconds. Each check to Appspace consumes a nominal amount of bandwidth. Use a smaller value to respond quicker to application updates. This is suitable when applications accelerated have frequently updated content. Use a higher value to increase the duration between checks and reduce bandwidth usage. This is suitable when you need to control the number of times SmartHub makes a check to Appspace.
Maximum Concurrent Downloads When a content update is active, SmartHub ASE will make multiple concurrent connections to Appspace to download content files. This property defines the maximum number of concurrent downloads SmartHub will use to download content from Appspace. Use a higher value if network bandwidth is large to optimize download speeds. Conversely, use a smaller value to limit bandwidth usage.
Maximum Throughput Per Connection (KB/s) For every download connection as defined in the previous property, this property defines the maximum throughput bandwidth that SmartHub ASE can use. This value does not exceed the actual physical available bandwidth.
Maximum Throughput Total (KB/s) This property defines the total throughput bandwidth that SmartHub ASE can use for all active concurrent downloads. This value does not exceed the actual physical available bandwidth.

SmartHub ASE Services Hardening

The following steps should be performed on your SmartHub ASE server in order to properly harden/configure it for failure and recovery scenarios.

Step 1

From the Windows Start menu, open the Administrative Tools and proceed to access Services.

Step 2

Within the Services menu, locate the Appspace SmartHub ASE Service line and right-click to select Properties.

Step 3

In Appspace SmartHub ASE Service Properties, select the Recovery tab. Configure all three failures (first, second, and subsequent) with ‘Restart the Service’ from each respective drop-down menu. Ensure that 0 is set as the reset fail count and that services are restarted after 1 minute. Click the OK button to save your changes and exit.

../../../../_images/03d6.png

Important

Once you have completed the installation, registration, and SmartHub server hardening processes, you must restart the server for all configuration settings to take effect.

Installing the ASE Manager Extension into Appspace (On-Premise Only)

If you have registered your SmartHub to an on-premise Appspace server, you will need to install the SmartHub ASE Manager extension to be able to access and manage your SmartHub device(s).

Step 1

Log into your Appspace Cloud account (https://cloud.appspace.com) and access the Marketplace through the drop-down menu in the upper-left corner of the page.

Step 2

Within the Marketplace you should see the ‘Show’ drop-down category menu near the middle of the page. Select Extensions from this menu.

Step 3

The page should now display various Appspace extensions. Locate and click on the one for ASE Manager.

Step 4

On the page that shows additional details for the ASE Manager extension, click DOWNLOAD to save this extension to an easily accessible location on your on-premise Appspace server.

Step 5

Access and log into your on-premise Appspace server instance with an account that has Portal Administrator privileges. Click on the user icon in the upper-right corner and proceed to access the Extensions page.

Step 6

On the Extensions page, click the Install Extension icon.

Step 7

Click on the folder icon to browse and select the ASE Manager extension file (.zip) from your local machine that was recently saved/downloaded. Click Upload to continue.

Step 8

The extension details will be displayed on the page. Scroll down to the bottom and click Save to finish installing this extension to your on-premise Appspace server.

Step 9

You should now see the ASE Manager extension listed on the Extensions page.


You can also check the Network Management extension on your server to make sure that a new tab called SmartHub ASE is now visible/accessible.