This article provides the instructions to create and configure a Room Schedule card with Microsoft Office 365 provider settings. The Room Schedule card is ideal for single room scheduling.

When the Room Schedule card is configured and displayed on a tablet/TV outside the respective meeting room, the following features will be available to you:

  • Room information: the room name and status indicating if the room is available, offline, or occupied is displayed.
  • Meeting information: details of current meeting and upcoming meetings for the day.
  • Booking functions:
    • Book now – ability to book 30 minutes, 1 hour, or 1.5 hours from the current time, based on room availability.
    • Book in advance – book future time slots (on the same day only) or up to 7 days in advance, based on room availability.
    • Check-in – option to check in to a meeting from 10 minutes before until 10 minutes after the start of the meeting.
    • Extend meeting – extend current meeting by 30 minutes, 1 hour, or 1.5 hours.
    • End meeting – end current meeting, and make the room available.

Note
If you are an end-user looking for information on booking a scheduled meeting via our App or your calendar, please refer to Booking Single Meeting Room.

In order to use the room booking and scheduling service with our Room Schedule card, you must do the following:

  1. Create an Office 365 booking account, add resources, and delegate access, with Office 365 Administrator credentials.
  2. Create Room Schedule card in the Appspace console.
  3. Create a playlist channel and add the Room Schedule card.
  4. Assign the playlist channel to a registered device (tablet) installed with the Appspace App.
  5. Book a room directly on the Appspace App or via your email calendar.

Important

  • Please refer to our An Introduction to Cards and Channels guide for an in-depth introduction to the types of cards that are ideal for your signage solutions.
  • Cards are only supported on devices with the Appspace App. Legacy devices are not supported.

What’s in this article:

Prerequisites

  • Account Owner, Publisher, or Editor (author) role in Appspace role in Appspace to create and configure the Room Schedule card.
  • An Office 365 Administrator role to configure Office 365 booking accounts.
  • It is recommended that the device clock is set to automatically retrieve time from a Network Time Protocol (NTP) server with the correct time zone, in order for it to sync correctly with the calendar provider.
    Appspace Cloud servers retrieve time from a NTP server by default. If an Appspace on-prem server is used, configure the on-prem server to retrieve time from an NTP server with the correct time zone.
  • If using an Appspace on-prem deployment, configure the on-prem server and network to allow constant access to https://*.cloud.appspace.com and its subdomains, to ensure each device is able to attain new authorization tokens from the calendar provider on a regular basis via Appspace API services.

Create Booking Account and Configure Resources

Important
The instructions in this section must be completed first by an Office 365 Administrator prior to configuring a Room Schedule card in the Appspace console.

Please select one of the following options and follow the instructions:

Create Room Schedule Card

Important
You will need Account Owner, Publisher, or Editor (author) privileges to perform the steps below.

To create and configure the Room Schedule card, please follow the instructions below:

  1. Log in to the Appspace console.
  2. Click the QUICK ACTION menu on the top right and select Create Card, and proceed to step 4 below.
    Or click Library from the Appspace Menu navigation bar on the left, and proceed to step 3 below.
  3. Select the desired folder in the library, click the ADD button, and select Create Card.
  4. Select Room Schedule from the Filter by template menu, and select a desired card template.
  5. Select the Office 365 data provider, and click Connect.
  6. Select the authentication type depending on your booking account.
  7. Enter in your Microsoft Office 365 booking account credentials for meeting room bookings to authenticate the Room Schedule Card.
    Note
    Please contact your Microsoft O365 Administrator for credentials. Some large organizations may have one account for each room.
  8. Once authentication is successful, assign a room to the card by selecting one of the two options provided:

    • Automatic room assignment from a player property
      This option allows you to use the same card (with the defined configuration and branding themes) for multiple rooms.
      • You must then add a device property (card.room.roomid = <resource id>) to each device and ensure it points to the desired meeting room (One specific tablet for each meeting room.)
        Example:
        • Device 1 player property for Meeting Room 1: card.room.roomid = room-001@appspacedev.onmicrosoft.com
        • Device 2 player property for Meeting Room 2: card.room.roomid = room-002@appspacedev.onmicrosoft.com
      • The resource id is the email alias obtained from the Office 365 Calendar Resources page for each physical meeting room configured; refer to B. Configure Office 365 resources.
      • Click here for instructions to Add a device property. You will need Network Administrator or Account Owner privileges to add a property.
    • Manually selecting by room name
      This option allows you to assign one room directly to this card. If you have 10 rooms, you must create 10 cards for each room.
      • The default manual selection option text would be Manually selecting by room id with a Search by name link shown below, which upon clicking prompts you to enter a user email address (booking account email address) to retrieve the resources list. If an email address has been entered previously, the manual selection option text would read Manually selecting by room name instead.
        Note
        If this manual option is selected, while the device is also configured with a player property for automatic room assignment, then the manual assignment of the room takes precedence.
  9. Click Finish.
  10. Configure the booking options that will be available to the user, by checking the Enable bookings check box, to display the following Booking Options:
      • Allow naming of meetings.
      • Allow users to end meetings.
      • Allow users to extend meetings.
      • Enable advanced booking.
      • Enable time slot availability on front page.
      • Enable meeting check-in.
      • Allow 7 days advance booking.

        Important
        Unchecking the Enable Bookings checkbox hides the booking options. If the Room Schedule card detects that the service provider has restricted viewing access to a meeting room/resource or the Enable Bookings option has been disabled, the card will automatically disable the interactivity and booking functions for that room on the app (Appspace App), and the “Interactivity has been disabled for read-only room” message is displayed. However, meeting information will still be displayed.

  11. Configure the card Styling, by checking the checkbox to enable the following styling features:
    • Show organizer’s name – displays the organizer’s name.
    • Show meeting name – displays the meeting name.
    • Show upcoming meetings – display upcoming meetings of the day.
    • Show clock – displays the date and time.
    • 24 hour clock – display the time in 24 hour format.
  12. You may further customize the Room Schedule card, with the following options:
    • Room Name
    • Room Label
    • Layout
    • Logo
    • Background color or media
    • Background Mask Color
    • Available State Color
    • Occupied State Color
      Note
      You may set an image or a video as the background media.
      Additionally, you may manually add the Room Name, Room Label, Room Facilities, and Room Capacity via the following device properties (added individually for each registered device):
      Name Device Property Value
      Room Name card.room.roomname Alphanumeric and special characters
      Room Label card.room.label.room Alphanumeric and special characters
      Room Facilities card.room.facilities Ethernet
      Phone
      Projector
      VideoConference
      WhiteBoard
      WiFi
      ScreenShare
      Room Capacity card.room.capacity Numeric characters
      • To display more than one room facility, add the values separated by a coma.
        Example: card.room.facilities: Ethernet, Phone, Projector
      • The Room Schedule card will display the room capacity from 1 to 100, anything more than 100 would be displayed as >100.
        Example: card.room.capacity: 20
      • Click here for instructions to Add a device property. You will need Network Administrator or Account Owner privileges to add a property.
  13. The preview pane displays the card. Click the Card Configuration icon to preview the Occupied or Offline status, change the room, or to log out from the card.

    Note
    The booking status of the meeting room is only a preview and is not indicative of the real status in this preview.
  14. Click Next.
  15. Enter in the card Title, and click Save.

    Optionally, you may enter in details for the ArticleCaptionContent Tags, and add a Custom Thumbnail for the card.
    Important
    Please leave the Expires on field blank. Do NOT enter an expiry date.

Create Playlist Channel and Add Room Schedule Card

Important
You will need Account Owner, or Publisher privileges to perform the steps below.

  1. Log in to the Appspace console.
  2. Click the Quick Actions menu, and select Create Channel to create a playlist channel. Enter in the Playlist channel name.
  3. Click ADD CONTENT, and select the Room Schedule card from the Library. Click Add once done.
  4. We recommend setting the Content Duration of the card to 30-minute intervals, (current default is 8 seconds) so that the card does not refresh while you are updating the booking details.
  5. Click the Apply button to save the settings.

Assign Playlist Channel to a Registered Device

Important
You will need Account Owner or Network Administrator privileges to perform the steps below.

  1. Register your device (tablet) as per the Register a device article.
  2. Go to the Appspace menu, and select Devices.
  3. Select the name link of the device that will be used for the meeting room.
  4. In the Device Information page, click the Settings tab, and select Admin assigns a single channel option from the Channel selection mode drop-down menu.
  5. Navigate back to the Overview tab, and click the Select channel button, and select the playlist channel with the Room Schedule card, created earlier.
  6. Click Save. The meeting room booking service can now be viewed on the app. 

Book Meeting Room via a Calendar or the Appspace App

For booking instructions, please see Booking Single Meeting Rooms.

Related Articles
Browse By Category